New Technology from Works Connection!

- ELITE AXLE BLOCK KIT –

KTM/Husqvarna

Our Elite Axle Block Kit converts your stock KTM / Husqvarna rear axle from a fixed design into a floating type. Our kit retains your stock axle and aluminum axle nut so your ‘leaner’ triangle can still be used.

KTM and Husqvarna down sized their axles from 25mm to 22mm for the 2023 models, so we went back to the drawing board and designed an all-new kit.

 Our ‘kit’ consists of a pair of cnc’d Elite Axle Blocks, a machined Titanium drive side receiver and a square removal tool nut.

KTM and Husqvarna Factory teams use this same floating type design on their race team bikes to improve traction as well as straight line stability and now those same benefits are available from this kit. Another key component is the integrated receiver post on each axle block that allows the use of a caliper to precisely measure and match the left and right axle block’s position. This ensures exact alignment of the chain and sprocket so critical to prolonging chain and sprocket life. Ultra-slim design, simple installation and offered in five vibrant color choices: Blue, Red, Black, Orange and Silver. Designed and manufactured in the USA.

 ELITE AXLE BLOCK KIT Video

                                                               Retail $ 99.95

Part #’s

17-251 (Blue)

17-256 (Red)

17-261 (Black)

17-264 (Orange)

17-316 (Silver)

 Check out all things Works Connection at www.worksconnection.com

Horsepower Hill...Who Gets To The Top First?

Works Connection Pro Launch Start Device Will be at Washougal Saturday!

Starts at Washougal are critical for success. Everyone wants to get to Horsepower Hill first. You don't want to be mid pack getting pelted with rocks. Almost all Pros now use a start device for dirt starting lines. Look down the line at Washougal and you will see that most Pros are using the Works Connection Pro Launch Start Device. 

If you race at tracks that have dirt starting lines you need the WC Pro Launch device. It is the best on the market just ask Eli Tomac. It is almost an unfair advantage at local tracks. Easy to install and use as well as very durable. Priced right and available.

Visit www.worksconnection.com for more info.

Matrix Concepts Scores Again!

"Most of the MX43 readers remember when a Jerry can was essential for all dirt bike riders. You could find one at most Army surplus stores. They were rugged, tough, red or green, held 5 gallons and were very ugly. Now you can have one with great style and personalized." MX43

SS1 5-GALLON STAINLESS STEEL UTILITY CAN 

Polished Stainless Steel with custom name and number graphics FREE. Great for ATV's, Side X Side's, Motorcycle's, Jeep's and more. Will fit in most Utility Can carriers. 

• Great for track, garage, shop. Tradition "JERRY JUG SHAPE".
• Includes FREE custom Name & Number, a $45.00 value. 
• Super durable. Lightweight. 
• Computer aided robot welds for strenght and quality. 
• Easy to handle with top hand rails and with lower lip gives you a built in handle at bottom.
• No spill - easy to use 13" flex hose kit with built in screen and fits inside can under the cap for easy transport.
• Aluminum CNC precision no leak cap with o-ring seal.
• 6" Deep X 14" Wide X 18" Tall

FOR USE IN INDUSTRIAL CONSTRUCTION AND MOTORSPORTS INDUSTRIES. FOR TRANSPORTATION STORAGE AND PROPER DISPOSAL OF LIQUIDS SUCH AS ANTIFREEZE, ENGINE OIL, GEAR OILS, HYDRAULIC FLUID AND TRANSMISSION FLUIDS. NOT INTENDED FOR DRINKING WATER STORAGE. NOT SOLD FOR OR TO BE USED AS A PORTABLE FUEL CONTAINER.

SS1 5 GALLON STAINLESS STEEL UTILITY CAN $169.95

Thunder Valley Beat the Heat...Matrix Time!

"Thunder Valley is this Saturday and traditionaly that means HOT WEATHER....summer is here. It is hard to beat an ice cold beverage after a hot moto but most coolers don't do well sitting in the pits and leave you with warm drinks. Matrix Concepts to the rescue their new M200 does the job with style! You not only get super chilled drinks but you look cool with your own personalized graphics on your cooler. MX43 highly recommends you Beat the Heat with the M200 Cooler."

M200 MATRIX CONCEPTS COOLER 

The new “Custom" M200 MATRIX CONCEPTS COOLER BY LAKA is thoughtfully designed to stay super chill while you live life to the fullest. Get the high-quality you deserve and the features you need for wherever you go. It’s the best of all worlds.

Just the right size for your everyday outings. We designed it with a unique oval shape (patent pending by Laka) that takes up minimum space but delivers maximum cooling performance. It’s your new go-to cooler. It’s super tough yet 25% lighter than comparable coolers to go where your thirst for adventure takes you. Check out all the features below - designed for fun enthusiasts like you.

Features & Benefits Included:

• Available in all team colors.
• Customize it with name & number FREE.
• Thick Wall Design – Keeps ice cool for 10 days.
• Thermal Barrier – Polyurethane foam keeps cold in.
• Strong Rubber Latches – High-Tensile strength yet easy to open & close.
• Rotomolded – Constructed for durability.
• Ergo Handles – Easier to carry.
• Molded Tie – Down Spots – Mounts to your truck bed.
• Bottle Opener – Stainless Steel durability.
• Easy Flow Drain – Leakproof & drains fast.
• Traction Lid – Stand on it. Very Stable.
• Freeze Lid Gasket – Airtight locks in chill.

Weights 

• 13.5 lbs Empty Weight
• 25 lbs Straight Ice
• 18 Cans with 2:1 Ice to Can Ratio

Dimensions: 

• Interior Depth; 13” X Width 10” X Length 13.25”
• Outer Depth; 16.5” X Top Width 17.5” Bottom 16"

Please note your "super easy to install graphic kit" comes under separate cover from our Valencia print shop for you to install. Your cooler comes direct to you from the  midwest warehouse

Check the M200 at www.matrixracingproducts.com

Tusk Adventure Bags

The Tusk Pilot Pannier Bags are now easier to mount up and remove from your motorcycle pannier racks or Tusk Mounting Plate. These panniers now feature a replaceable strap system and the ability to attach a bottle holder using the Molle system. Even though they are made of top-quality materials and workmanship, the Pilot bags are still extremely affordable. The bags mount easily to just about any pannier rack and allow for easy removal of the entire bag from the motorcycle. Removable, waterproof liners not only keep your gear dry, but they make loading and unloading simple. These saddle bags are a great offering to those wanting to get into adventure/touring motorcycling at a reasonable price without sacrificing durability and quality.